2000 Series monitoring and Display systems

The success of the single and multi-channel electronic tank level gauging & monitoring systems has lead to a new generation of versatile products from PSM.       

The series 2000 range of tank monitoring devices offers real flexibility to suit any size and number of tanks in the most cost effective manner. All models from single to multi-channel options are fully compatible with any PSM level transmitters to ensure a 'no hassle' installation.  

Powerful, versatile, simple to apply & cost effective, attributes common to all members of PSM’s new generation of 2000 series. Developing on the capabilities of its highly successful predecessor, the range offers comprehensive display & control facilities to keep you clearly in the picture    

26Ghz Radar level transmitter

The VG7 High frequency (26 GHz) Radar operates on the same proven principle of the earlier lower frequency 10 GHz FMCW Radars.

Enhanced accuracy Vs Pulse Radar

 The difference in dynamic range between the best pulsed systems and the VG7 is more than 30 dB.  This is equivalent in signal power to a sensitivity that is 1000 times greater.  The larger dynamic range of the VG7 allows more stable detection of liquids with very low dielectric and thus very weak reflections.  Between an dielectric of 2 and a dielectric of 1.2, in an otherwise identical measurement environment, the difference in level is approximately 11.5 dB, which is equivalent to 14 times the power difference on a linear scale.

This rugged design of switch is used throughout the process industries.  It is available with a wide range of flanged or screwed process connections and can have extensions, enabling the probe to reach 3 metres into a tank if required. The wetted parts of standard switches are 316 stainless steel but special Halar coated and Hastelloy switches are used for extremely corrosive applications  and hygienic probes are available for the food industry.

Ultrasonic Level Transmitter

'THE ULTRAMETER II'

The Ultrameter II family represents a real advance in the use of ultrasound for non-contact level measurement. It is suitable for both liquids and solids measurement. A highly developed and ultra efficient range of sensors emit a significantly higher power acoustic wave than earlier generation devices, providing enhanced accuracy and resolution and the ability to automatically compensate for and operate reliably in acoustically “noisy” or absorbent atmospheres such as vapour, or dust.

BILGE ALARM / WATER LEVEL SWITCHES 

 A compact but rugged bilge water alarm switch for Marine use on vessels of all sizes.  

For larger ships the Tankview distributed data acquisition and monitoring system can stand-alone or communicate with most ships management computer systems.

The BLS 9200 bilge alarm switch has been environmentally tested as required for Marine Type Approval laid out in IACS Unified requirement E10 and the relevant sections of IEC945

 

---

Water ingress detection, monitoring & alarm system W.I.A.S.

To meet

Solas Chapter XII regulation 12

IACS unified requirement UR S24

IMO DE46/18/1 & 2

including the new amendment for single hold cargo ships

Constant self-checking of sensors and ‘live zero’ alarm signal confirms operational health. Simple menu driven/push button operation with functional checks available at any time (with holds empty or filled.) Optional remote displays

CARGO TANK HIGH LEVEL AND OVER PRESSURE ALARM MONITORING SYSTEMS  

Request a data sheet describing these systems or contact us for budgetary quotation.